54
8575
8575
N/B Maintenance
N/B Maintenance
APM mode
At ACPI mode. Windows power management control panel set power button behavior.
You could set “standby”, “power off” or “hibernate”(must enable hibernate function in power Management) to
power button function.
Continue pushing power button over 4 seconds will force system off at ACPI mode.
1. None
2. Standby
3. Off
4. Hibernate (must enable hibernate function in power management)
System automatically provides power saving by monitoring Cover Switch. It will save battery power and
prolong the usage time when user closes the notebook cover.
At ACPI mode there are four functions to be chosen at windows power management control panel.
1.3.3 Cover Switch
1.3.4 Reset Switch
There is a reset switch at bottom side of notebook. It will reset embedded controller H8 and turn off system
totally. When system hands up and Power button has no function, this switch is the only way to turn off
system without remove power source.
To Next Page
Loading...
