Mitel 5055 - Page 80

5055 SIP Phone User Guide (Rev. A)
- 74 -
dtmf_type= 0
#dtmf payload(96-127)
dtmf_payload= 96
#Media port configuration start port
start_port= 8000
#Media port configuration start port
end_port= 19998
##################################################################################
# feature configuration
##################################################################################
# auto answer mode
# choice [0-disabled, 1-enabled]
auto_answer= 0
# auto answer reason code
# 0- in a meeting
# 1- out of town
# 2- at lunch
# 3- on vacation
# 4- in a conference
# 5- in lab
# 6- back in 5 minutes
# 7- gone home
# 8- on a course
# 9- off sick
# 10- other reason
reasons= 0
# other reason string
# when reasons = 10, the sip will copy this string to the "reject reason" field.
other_reason= i am busy now!
# do not disturb
# choice [0 - disable, 1-enable]
# when enabled, all incoming calls will be rejected, or forwarded to the voicemail
do_not_disturb= 0
# call forwarding no answer mode
# choice [0-disabled, 1- enabled]
# when enabled, the incoming call will be forwarded to the "noans_fwd_addr"
# the condition defined by the "try_ring_nums"
noans_fwd_mode= 0
# call forwarding no answer after defined number of rings
# integer [1, 20]
try_ring_nums= 4
# call forwarding no answer address
# sip url for forwarding the call
# in the format of user_id, or user_id@domain.com
# if only user_id is configured, the call will be forwarded to the user_id@proxy
noans_fwd_addr= 1002
# call forwarding always mode
# choice [0-disabled, 1- enabled]
# when enabled, the incoming call will be forwarded to the "always_fwd_addr"
always_fwd_mode= 0
# call forwarding always address
# sip url for forwarding the call
# in the format of user_id, or user_id@domain.com
# if only user_id is configured, the call will be forwarded to the user_id@proxy
always_fwd_addr= 1002
# call forwarding when busy mode
# choice [0-disabled, 1- enabled]