Mitel 5055 - Page 83

Appendix C — Configuration Files
- 77 -
time_zone= -5; EST time
#time_zone= 8; China
# tos
# integer [0, 1e] (even numbers only);
tos= 0
# IEEE 802.1 priority
# integer [-1, 0, 7]
# -1 means OFF
802_priority= -1
# VLAN ID
# integer[0, 4095]
vlan_id= 0
##################################################################################
# IP network configuration
##################################################################################
#dhcp (0 = disable, 1 = enable)
dhcpenable= 1
#ip address
ipadr= 192.168.0.1
#network mask
ipmask= 255.255.255.0
#network gateway
ipgateway= 192.168.0.1
#primary dns server
ipdns= 192.168.0.1
#secondary dns server
ipscddns= 192.168.0.1
#pppoe(0 = disable, 1 = enable)
pppoe_enable= 0
#pppoe login
pppoe_login= NULL
#pppoe password
pppoe_passwd= NULL
##################################################################################
# user profile configuration
##################################################################################
#multiple user profile(0 = disable, 1 = enable)
multi_user_enable=0
# user id.
# used to register to the sip proxy as user_id@domain
# this id must be one sting, no space is allowed
user_id= user
# user display name.
# used for display the user's human readable name in sip "from" header
# from= "display name" sip= user_id@domain
disp_name= disp username
# user_name
# used as the user identify for authentication purpose. It could be same as user_id.
# but it could also be different. such as in the format of user_id@domain