Teleworker Remote IP Phone Configuration Guide
3
About your Remote IP Phone
The Teleworker Solution supports the following IP Phones:
• Mitel 5020 IP Phone • Mitel Dual Mode 5215 IP Phone
• Mitel 5212 IP Phone • Mitel Dual Mode 5220 IP Phone
• Mitel 5215 IP Phone • Mitel 5235 IP Phone
• Mitel 5220 IP Phone • Mitel Navigator
• Mitel 5224 IP Phone • Mitel Your Assistant Softphone
For more information about your IP Phone and its features, refer to the appropriate User Guide
available at Mitel OnLine (see Supporting Documentation on page 2). For installation and wall-
mounting information, refer to the Installation Guide packaged with your IP Phone.
Remote IP Phone Capabilities
Combined with the Teleworker Solution, your IP Phone will provide you with a single-phone solution
for both office and remote telephony requirements.
When configured for Teleworker use, the remote IP Phone h
as the following capabilities:
• Encryption to provide a secure voice path between the phone and system across the Internet
• Adaptive jitter buffering and other software enhancements to improve voice quality over the
Internet
• G.729 compression to reduce bandwidth requirements
• Same operation as any other phone connected to the network
• Operation over any broadband LAN connection that provides connectivity back to the
corporate office where the 6000 MAS is visible from the Internet
• Direct access to the corporate office phone system (for example, voice mail and
conferencing).
• Support for Voice First Application (5020 and 5220 IP Phones only)
To Next Page
Loading...
Need help?
General
