Introduction
This chapter provides detailed procedures for configuring the following advanced settings for
the UC360:
• Sound (see “Sound” on page 51)
• SIP Settings — See “SIP Settings” on page 12.
• Apps Settings — See “Apps Settings” on page 16.
• Network Settings — See “Network Settings” on page 17.
• LDAP/AD Settings — See “LDAP/AD Settings” on page 21.
• Dial Plan Settings — See “Dial Plan” on page 25.
• Video Settings —See “Video Settings” on page 27.
• RDP Settings — See “RDP Settings” on page 28.
• VNC Settings — See “VNC Settings” on page 29.
• History Settings — See “History Settings” on page 30.
• Extension Microphone Settings — See “Extension Microphone Settings” on page 31.
• Advanced Settings Password — See “Advanced Settings Password” on page 32.
• Camera Settings — See “Camera Settings” on page 33.
• Country Variant — See “Country Variant” on page 40.
• Dialpad Settings — See See “Dialpad Settings” on page 41.
• Backup Import/Export — See “Backup Import/Export” on page 42.
• Upgrade System S/W — See “Upgrade System Software” on page 44.
• Debug Settings — See “Debug Settings” on page 47.
• Web Server Settings — See “Web Server Settings” on page 48.
• Reboot — See “Reboot” on page 49.
• Factory Reset— See “Factory Reset” on page 50.
Refer to the following documents for more information:
• UC360 User Guide for a description of the UC360, its interface, how to make and receive
video calls, and set up remote collaboration.
• UC360 Installation Guide for instructions on physically connecting the UC360 Collaboration
Point.
• UC360 Engineering Guidelines for information on various configuration settings and UC360
engineering requirements.
To Next Page
Loading...
