UC360 Administration Guide
Apps Settings
The Apps Settings allows you to enable or disable any of the shareable applications that are
currently implemented on the UC360.
1. Press Settings .
2. Press Advanced.
3. Press System Settings.
4. Press Apps Settings.
A list of all the currently installed apps will be displayed. Each app has its own check box. You
can enable each check box as desired by tapping the check box to check or uncheck it.
A check mark in the box enables the associated app. If there is no check mark in the box, then
the associated app is disabled.
The available apps are:
• Mitel MiCollab Conference
•Browser
• Smart Office 2
• Files
• Cisco WebEx Meetings
•join.me
• RemoteRDP
• RemoteVNC (disabled by default)
Note: If a USB keyboard is connected to the UC360, Num Lock does not function.
No Apps Enabled
If the administrator chooses to disable all apps, then the Present icon on the main screen will
be disabled and grayed out so that pressing them will have no effect.
Software Upgrade and App Settings Defaults
When the UC360 software is upgraded from version 2.0.x to 2.1.x software, the default settings
for each app will be set to enabled, except for Remote VNC. When the upgrade from 2.0.x to
2.1.x occurs, new database entries are created for the Apps Settings and the default values
are set. Subsequent software upgrades will not need to reference the default values, and will
use the existing values from the database.
To Next Page
Loading...
