Parameter Setting for the parameter unit, operation panel
FR-E700SC EC 6 - 313
6.22 Setting for the parameter unit, operation panel
6.22.1 RUN key rotation direction selection (Pr. 40)
Used to choose the direction of rotation by operating the RUN key of the operation panel.
The above parameter can be set when Pr. 160 "User group read selection" = 0.
6.22.2 PU display language selection (Pr. 145)
By using parameter 145 you can select the display language for the parameter unit FR-PU04/FR-PU07.
The above parameter can be set when Pr. 160 "User group read selection" = 0.
Purpose Parameters that must be set
Refer to
Section
Selection of rotation direction by the
RUN key of the operation panel
RUN key rotation direction selection Pr. 40
6.22.1
Switch the display language of the
parameter unit
PU display language selection Pr. 145 6.22.2
Use the setting dial of the operation
panel like a volume for frequency set-
ting.
Key lock of operation panel
Operation panel operation selection Pr. 161 6.22.3
Change the magnitude of change of
frequency setting by the setting dial of
the operation panel
Magnitude of frequency change setting Pr. 295 6.22.4
Control of the parameter unit buzzer PU buzzer control Pr. 990 6.22.5
Adjust LCD contrast of the parameter
unit
PU contrast adjustment Pr. 991 6.22.6
Pr. No. Name Initial Value Setting Range Description Parameters referred to
Refer to
Section
40
RUN key rotation direction
selection
0
0 Forward rotation
—
1 Reverse rotation
Pr. No. Name Initial Value
Setting
Range
Description Parameters referred to
Refer to
Section
145
PU display language selec-
tion
1
0Japanese
—
1English
2German
3French
4Spanish
5Italian
6Swedish
7 Finnish
To Next Page
Loading...
Need help?
General
