Mitsubishi Electric Melsec A Series - Page 193

5 - 27
REPLACEMENT OF THE MELSECNET/10 (REMOTE I/O NETWORK)
5
(4) Parameter of parallel remote master station
: Compatible, : Partial change required, × : Incompatible
Parameter
name
Description
Compat-
ibility
Precautions for replacementQnA/QnAS series
MELSECNET/10 module
Q series
MELSECNET/H module
Network
parameter
Network type
-
Cannot be configured on the
remote I/O network of
MELSECNET/H.
Configure two networks.
Starting I/O No.
Network No.
Total number of (slave) stations
Network range
assignment
(common
parameter)
Monitoring time
BW setting
XY setting
Sub-BW setting
Sub-XY setting
Remote sub-
master station
specification
Reserved
station
designation
I/O assignment
setting
Supplemental
settings
Refresh parameters
Routing parameters
Valid module during other
station access