Mitsubishi Electric MELSEC iQ-R-R04CPU - Page 465

28 FUNCTIONS
28.3 Tracking Transfer
463
28
■Global device setting
Set devices and their ranges for each tracking block No.
[CPU Parameter]  [Redundant System Settings]  [Tracking Setting]  [Device/Label Detailed Setting]  [Global
Device Setting]
Window
Displayed items
To input devices and their ranges set in "Device/Label Memory Area Setting" in a batch, click the [Device
Setting Reflection] button.
Item Description
Device Setting Reflection Reflects the device setting of "Device/Label Memory Area Setting" in the CPU parameter.
(Except for the annunciator (F), link special relay (SB), and link special register (SW))
Tracking Block No. Select the number of a tracking block to be set.
File Register Setting Enter a file name of the file register file.
This item is valid only when the file register (ZR) is selected in the device name field.
Device Select a device to be transferred. ( Page 456 Devices that can be specified)
Start/End Specify a range of devices to be transferred.