532
32 MEMORY SPECIFICATIONS
32.4 Files
File operation available
The following lists file operations which are available for each file type.
In TEST MODE
The following lists file operations which are available for each file type in TEST MODE.
: Available, : Not available, : N/A
*1 To write files to the programmable controller, use the write function when the operating status of the Safety CPU is STOP. When the
operating status is RUN, use the online change function. When the Safety CPU operating status is RUN, only the standard programs
registered in the CPU parameter can be written to the programmable controller.
*2 Operation is possible only when the operating status of the Safety CPU is STOP/PAUSE. If performed in RUN state, the operating status
of the Safety CPU is changed by the remote STOP function, and then the operation continues.
*3 This indicates operations performed using the CPU Module Logging Configuration Tool.
*4 This parameter relates to safety control inside the CPU parameters. ( Page 936 Safety CPU parameters)
This item is yellow in the engineering tool CPU parameters.
File type Operation using engineering tool Operation with SLMP and FTP
server function
Operation with
instructions in
standard programs
Write Read Delete Write Read Delete Write Read
Standard program
*1
*2
Standard FB file
*2
*2
Standard CPU parameter
*2
*2
System parameter
*2
*2
Standard module parameter
*2
*2
Module extension parameter
*2
*2
Memory card parameter
*2
*2
Device comment
*2
Initial device value
*2
Standard global label setting file
*2
*2
Label initial
value file
Global label initial
value file
*2
Local label initial
value file
*2
File register
*2
Event history
Device data storage file
General-purpose data
Data logging
setting file
Common setting
file
*3
*3
*3
Individual setting
file
*3
*3
*3
Remote password
*2
*2
Safety program
*1
*2
Safety FB file
*2
*2
Safety CPU parameter
*4
*2
*2
Safety module parameter
*2
*2
Safety global label setting file
*2
*2
Standard/safety shared label setting
file
*2
*2
To Next Page
Loading...
