82
1 RUNNING A PROGRAM
1.7 Interrupt Program
Interrupt priority setting
The interrupt priority (5 to 8) of interrupts from modules can be changed.
[CPU Parameter] [Interrupt Settings] [Interrupt Priority Setting from Module]
"Interrupt Settings" window
1. Set "Multiple Interrupt" to "Enable"
on the "Interrupt Settings" window,
and click "Detailed Setting".
"Detailed Setting" window
2. Change the priority of each interrupt
pointer.
Item Description Setting range Default
Multiple Interrupt Sets whether or not to enable multiple interrupt. • Disable
• Enable
Disable
Interrupt
priority
Detailed
Setting
Sets the priority of the interrupt pointers I0 to I15 and I50 to I1023. 5 to 8 8
To Next Page
Loading...
