Mitsubishi Electric MELSEC iQ-R-R04CPU - Page 983

APPX
Appendix 13 How to Use CPU Module Logging Configuration Tool
981
A
■Movement
The following window specifies the data logging operation when the operating status of the CPU module is switched to RUN
state. ( Page 205 Behavior of auto logging at the time of a transition to RUN)
Window
Displayed items
Item Description Setting range Default
Operation at transition to RUN Select the operation when the operating status of the
CPU module is switched to RUN state. ( Page
203 Setting Behavior at the Time of Transition to
RUN)
• Auto Start
• Start by User Operation
Auto Start