100
4 PROGRAMMING
4.1 Program Example of UCMM Message Communications
5.
Set the items in "Basic Setting" as follows.
[Navigation window] Ö [Parameter] Ö [Module Information] Ö [RJ71EIP91] Ö [Basic Setting]
6.
Write the set parameters to the CPU module. Then reset the CPU module or turn the system off and on.
[Online] Ö [Write to PLC]
■RJ71EIP91 (server) settings
Connect the engineering tool to the adapter-side CPU module and set the parameters.
1.
Set the CPU module as follows.
[Project] Ö [New]
2.
Click the [Setting Change] button to use the module label.
3.
Click the [OK] button to add the module labels of the CPU module.
To Next Page
Loading...
