74
3 EtherNet/IP Configuration Tool
3.1 Window Structure
IP address management window
Information such as the IP address of the RJ71EIP91 is displayed.
Set the address of the RJ71EIP91 with the module parameters of the engineering tool. ( Page 44 Basic Setting)
Select the EtherNet/IP module display in the network configuration settings.
*1
Ö [Device] Ö [Properties]
*1 For names of each display, refer to the following.
Page 66 Display content
Item Description
Module Address Module IP Address Displays the IP address of the RJ71EIP91.
Sub-Network Mask Displays the subnet mask of the RJ71EIP91.
Gateway IP Address Displays the gateway IP address of the RJ71EIP91.
Parameter Description Displays the description of the selected item.
To Next Page
Loading...
