2 PARAMETER SETTINGS
2.3 Basic Settings
131
2
■Parameter processing of a slave station
Select the module in the list of stations. [CC IE Field Configuration] [Online] [Parameter Processing of Slave
Station]
The parameters of a slave station can be set or read. This setting can be executed only when the slave station supports the
parameter processing. The setting range varies depending on the target module. For details, refer to the manual for the slave
station used.
■Command execution of a slave station
Select the module in the list of stations. [CC IE Field Configuration] [Online] [Command Execution of Slave
Station]
The command of a slave station is executed. This setting can be executed only when the slave station supports the command
execution. The setting range varies depending on the target module. For details, refer to the manual for the slave station
used.
To Next Page
Loading...
