Mitsubishi Electric MELSEC iQ-RJ71GF11-T2 - Page 164

162
3 PROGRAMMING
3.2 Communication Example Using the Submaster Function
4. Click the [OK] button to add the module labels of the master/local module.
5. Set the items in "Required Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Required Settings]
6. Set the network configuration as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Basic Settings]  [Network
Configuration Settings]
7. Set the refresh settings as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Basic Settings]  [Refresh Settings]