4 TROUBLESHOOTING
4.3 Checking the Network Status
225
4
■When a setting other than "No Specification" is specified in "Other Station Setting" on the
"Specify Connection Destination Connection" window
: Diagnosed : Diagnosed with restrictions : Not diagnosed
*1 When the own station operates as a submaster operating station, the function cannot be executed.
When starting the CC-Link IE Field Network diagnostics with a setting other than "No Specification" in "Other
Station Setting" on the "Specify Connection Destination Connection" window, use the engineering tool of the
version 1.035M or later.
Item The engineering tool is
connected to:
Restrictions Reference
Master station,
submaster
station
Local station
(1) Network map and error status Page 230 Diagnostics window
Cable disconnection and
disconnected station
(2) Status of the selected station
and the error definition
This item is not displayed when the
selected module does not support
"Selected Station Communication
Status Monitor" of the engineering tool.
Station number setting of the
slave station
*1
(3) Communication Test
IP Communication Test
Cable Test
Link Start/Stop
(4) Reserved Station Function
Enable
Enable/Disable Ignore Station
Errors
(5) Remote Operation When the selected station is other than
MELSEC iQ-R series, this function
cannot be executed.
Page 250 Remote Operation
To Next Page
Loading...
