236
4 TROUBLESHOOTING
4.3 Checking the Network Status
In the following cases, the network map that is different from the actual system configuration is displayed.
System configuration Display of the network map
Two stations are connected through a switching hub. Branches are not displayed in the network map.
Switching hubs are in cascade connection. Only one branch is displayed.
Engineering tool
Master station
(station No.0)
Intelligent device station
(station No.1)
Switching hub
Engineering tool Master station
(station No.0)
Intelligent device
station (station No.1)
Intelligent device
station (station No.2)
Intelligent device
station (station No.4)
Intelligent device
station (station No.3)
Switching hub
Switching hub
To Next Page
Loading...
