Mitsubishi Electric MELSEC iQ-RJ71GF11-T2 - Page 239

4 TROUBLESHOOTING
4.3 Checking the Network Status
237
4
Selected Station Communication Status Monitor
Displays status of the station selected in "Network Status".
■When a station where an error has occurred is selected
No. Description
(1) Indicates the operating status.
• Station No.: Normal operation
• Station No. Error (yellow): Error (Data link is continued.)
• Station No. Error (red): Error (Data link is stopped.)
(2) Displays a mode.
(3) Displays a MAC address.
(4) Displays an IP address (only when it is set).
(5) Click this button to check error details. Take actions following the description displayed in "Error Factor" and "Troubleshooting".
(6) Displays the LED status of a module and communication status of P1 and P2. ( MELSEC iQ-R Ethernet/CC-Link IE User's Manual (Startup))
(7) Displays status of the cables connected to P1 and P2.
(1)
(5)
(6)
(7)
(3)
(2)
(4)