96
1 FUNCTIONS
1.7 Redundant System Function
3. In the I/O assignment setting, set the redundant function module for slot No.0.
[Navigation window] [Parameter] [System Parameter] [I/O Assignment] tab [I/O Assignment Setting]
4. Set the RJ71GF11-T2 for slot No.1.
5. Click the [OK] button to add a module label of the RJ71GF11-T2.
6. Set the network topology in the following item.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2(MR)] [Basic Settings] [Network
Topology]
To Next Page
Loading...
