1 FUNCTIONS
1.7 Redundant System Function
97
1
7. Set the network configuration as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2(MR)] [Basic Settings] [Network
Configuration Settings]
8. Set the refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2(MR)] [Basic Settings] [Refresh
Settings]
9. Set the redundant function module of the own system as the system A in the "System A/B Setting" window, and reset the
CPU modules of both systems or power off and on the both systems.
[Online] [Redundant PLC Operation] [System A/B Setting]
To Next Page
Loading...
