4 - 40 4 - 40
MELSEC-Q
4 SETUP AND PROCEDURES BEFORE STARTING THE OPERATION
REMARKS
Testing status and the result can be checked in the following link special registers.
Baton pass status (host) SW0047 1F
H
: Offline test
Cause of baton pass interruption SW0048 2
H
: Offline test
Offline test execution item/faulty
station (requesting side)
SW00AC 03
H
or
04
H
: Loop test
Offline test result (requesting side) SW00AD 0 : Normal
1 or larger : Error code
For details of how to check the error contents, refer to Chapter 8.
To Next Page
Loading...
