Mitsubishi Electric Melsec QJ71LP21 - Send Range for each Station (LX;LY Settings)

5 - 15 5 - 15
MELSEC-Q
5 PARAMETER SETTINGS
5.3.2 Send range for each station (LX/LY settings)
Set send ranges for each station of LX/LY, which represent the amount of data that
can be sent by each station in a single network in one (two) block units.
The link devices (LX/LY) between the I/O master station (M station) and other station
(L station) are assigned 1:1.
The following example shows send ranges for each station (LX/LY settings) when each
of 512 points of link devices (LX/LY) is assigned to station numbers 2 to 4, using
station number 1 (host) as the I/O master station of block 1.
[Screen settings]
1M
P
11N
S
21N
S
31N
S
4 1N
S
8
X0
Y0
X
Y
X
Y
X
Y
X
Y
X1FFF Y1FFF
X1000
X11FF
X1200
X13FF
X1400
X15FF
Y1400
Y15FF
Y1000
Y11FF
Y1200
Y13FF
Block 1
Actual I/O
1M
P
1
(M station)
I/O master station
1N
S
2
(L station)
1N
S
3
(L station)
1N
S
4
(L station)
1N
S
8
Network No. 1
Actual I/O Actual I/O
Actual I/O
Actual I/O
to
to
to
to
to
to