5 - 40 5 - 40
MELSEC-Q
5 PARAMETER SETTINGS
5.9 Standby Station Compatible Module (High Performance model QCPU and Process CPU)
This parameter is set to configure a simple dual-structured system.
Specify a regular station to be paired with the standby station.
If the set regular network is down, the network of the wait station (standby station) is
enabled.
Click the Standby station compatible module
button to display the "Stand by station
/Remote master station compatible module" window, and select the corresponding
module.
• Default: No setting
Set a network module
to be used as a regular
station.
Click on the standby station
compatible module button.
To Next Page
Loading...
