5 - 21 5 - 21
MELSEC-Q
5 PARAMETER SETTINGS
5.6 Station Inherent Parameters (High Performance model QCPU, Process CPU,
Redundant CPU, and Universal model QCPU)
The station inherent parameters are used for rearranging each station's transmission
ranges (LB, LW).
Rearrangement of the each station transmission ranges (LB, LW) eliminates the need
for program modification even if link device settings are expanded during operation.
Also, it can remove unnecessary transmission ranges, keeping only necessary ranges.
(1) Setting items
(a) Display of the setting screen
1) For the control station
Click the Station inherent parameters button on the [Network
assignment] screen (common parameters) to display to display the
following screen.
The settings assigned with common parameters are shown in the
Network range assignment area.
2) For the normal station
The screen appears when the Station inherent parameters button is
clicked.
From [Reference network range assignment], common parameters of
the control station can be read. (Reference -> Select project -> Read)
This is useful for setting station inherent parameters with the control
station’s network range assignments being viewed.
Values can be set even if no values are displayed in the network range
assignment fields.
The network range assignment fields are merely used as a reference
for Setting 1 and Setting 2.
To Next Page
Loading...
