Mitsubishi Electric Melsec QJ71LP21 - 6) Reading and Writing Clock Data of Other Station CPU Modules (Z(P).RTMRD, Z(P).RTMWR)

7 - 100 7 - 100
MELSEC-Q
7 APPLICATION FUNCTIONS
7.4.5 (6) Reading and writing clock data of other station CPU modules (Z(P).RTMRD,
Z(P).RTMWR)
Target station
Refer to Section 6.3.
(a) Instruction format
1) Z(P).RTMRD
This instruction is used to read clock data from a programmable
controller on another station.
Applicable device
Setting
data
Applicable device
Internal device
File register
Link direct device
J
\
Intelligent function
module device
U
\G
Index register
Zn
Constant
K, H, $
Others
Bit Word Bit Word
n1
n2
n3
(D1)
(D2)
Instruction format
[Network No. specification]
[Execution condition]
[Instruction symbol]
Z.RTMRD
ZP.RTMRD
Command
n1
n3
(D1) (D2)
n2"Jn"
ZP.RTMRD
Command
n1 n3
(D1)
(D2)
n2
Z.RTMRD
"Jn"
[Network module starting I/O number specification]
[Execution condition][Instruction symbol]
Z.RTMRD
ZP.RTMRD
Command
n1
n3
(D1)
(D2)
n2
"Un"
ZP.RTMRD
Command
n1
n3
(D1)
(D2)
n2Z.RTMRD
"Un"
: If the host is the Basic model QCPU (function version B or later) or Universal model QCPU, " "(double quotation) for the
first argument can be omitted.