A - 15 A - 15
MANUALS
The following manuals are also relevant to this product.
Order each manual as needed, referring to the following list.
Relevant manuals
Manual name
Manual number
(Model code)
Q corresponding MELSECNET/H Network System Reference Manual (Remote I/O network)
Specifications, setup and procedures before starting the operation, parameter setting, programming and
troubleshooting of the remote I/O network of the MELSECNET/H network system. (Sold separately)
SH-080124
(13JF96)
Type MELSECNET/10 Network system (PLC to PLC network) Reference Manual
System configuration, performance, specifications and programming of MELSECNET/10 network system
(PLC to PLC network). (Sold separately)
IB-66440
(13JE33)
For QnA/Q4AR MELSECNET/10 Network System Reference Manual
System configuration, performance, specifications and programming of MELSECNET/10 network system
(PLC to PLC network). (Sold separately)
IB-66690
(13JF78)
COMPLIANCE WITH EMC AND LOW VOLTAGE DIRECTIVES
(1) Method of ensuring compliance
To ensure that Mitsubishi Electric programmable controllers maintain EMC and
Low Voltage Directives when incorporated into other machinery or equipment,
certain measures may be necessary. Please refer to one of the following
manuals.
• QCPU User's Manual (Hardware Design, Maintenance and Inspection)
• Safety Guidelines
(This manual is included with the CPU module or base unit.)
The CE mark on the side of the programmable controller indicates compliance
with EMC and Low Voltage Directives.
(2) Additional measures
(a) When using QJ71LP21 and QJ71NT11B
No additional measures are necessary for the compliance of this product
with EMC and Low Voltage Directives.
(b) When using QJ71BR11
To ensure that this product maintains EMC and Low Voltage Directives,
please refer to one of the manuals listed under (1).
To Next Page
Loading...
