Mitsubishi Electric Melsec QJ71LP21 - Page 231

7 - 7 7 - 7
MELSEC-Q
7 APPLICATION FUNCTIONS
(2) Interlink transmission parameters
When transferring data to other network, up to 64 transfer ranges can be set
between the network modules. Note that, when data from a given device range is
transferred to multiple network numbers, as many setting ranges must be set as
the number of transfer to networks.
[Setting example]
Module 1 (0
H
to 3F
H
)
Module 2 (1000
H
to 103F
H
)
Module 2 (1100
H
to 115F
H
)
Module 1 (100
H
to 15F
H
)
0
FF
100
LB LB
10FF
1100
1000
1FF
0
11FF
0 to 3F
100 to 15F
1000 to 103F
Make sure to set
the transfer to
within the host's
(control station)
send range.
1100 to 115F
MNET/H (control station)
module 1
MNET/H (normal station)
module 2
to
to
to
to
Make sure to set
the transfer to
within the host's
(normal station)
send range.
Transfer from Module1: MNET/H mode (Control station)
Transfer to Module2: MNET/H mode (Normal station)
Transfer to Module1: MNET/H mode (Control station)
Transfer from Module2: MNET/H mode (Normal station)
Click the button.