Mitsubishi Electric MELSERVO-J4 MR-J4 A Series - Page 133

4. STARTUP
4 - 30
(b) Parameters of 6 or more digits
The following example gives the operation procedure to change the electronic gear numerator to
"123456" with [Pr. PA06 Electronic gear numerator].
↹㕙߇ὐṌߒ߹ߔޕ
"MODE"ࡏ࠲ࡦࠍ᛼ߒߡၮᧄࡄ࡜ࡔ࡯࠲ߩ↹㕙ߦߒ߹ߔޕ
"UP"ࡏ࠲ࡦ߹ߚߪ"DOWN"ࡏ࠲ࡦࠍ᛼ߒߡ[Pr.PA06]ࠍㆬᛯ
ߒߡߊߛߐ޿ޕ
"SET"ࡏ࠲ࡦࠍ1࿁᛼ߒ߹ߔޕ
"SET"ࡏ࠲ࡦࠍ1࿁᛼ߒ߹ߔޕ
1ᩴߩ⸳ቯ
"UP"ࡏ࠲ࡦ߹ߚߪ"DOWN"
ࡏ࠲ࡦߢ⸳ቯ୯ࠍᄌᦝߒ߹
ߔޕ
"SET"ࡏ࠲ࡦࠍ1࿁᛼ߒ߹ߔޕ
⸳ቯ୯ࠍ⏕ቯߒ߹ߔޕ
"MODE"ࡏ࠲ࡦࠍ1࿁᛼ߒ߹ߔޕ
"MODE"ࡏ࠲ࡦࠍ1࿁᛼ߒ
߹ߔޕ
4ᩴߩ⸳ቯ
 
 
Press "SET" once.
Press "UP" or "DOWN" to select [Pr. PA06].
Setting of upper 1 digit
Press "MODE" once.
Press "SET" once.
Setting of lower 4
digits
The screen flickers.
Press "UP" or "DOWN" to
change the setting.
Press "SET" once.
Enter the setting.
Press "MODE" once.
Press "MODE" to switch to the basic setting parameter screen.
Press "UP" or "DOWN" to select [Pr. PA06].