Mitsubishi Electric Q06HCPU - Page 564

562
D9016 SD1016 
Program
number
0: Main program
(ROM)
1: Main program
(RAM)
2: Subprogram
1 (RAM)
3: Subprogram
2 (RAM)
4: Subprogram
3 (RAM)
5: Subprogram
1 (ROM)
6: Subprogram
2 (ROM)
7: Subprogram
3 (ROM)
8: Main program
(E
2
PROM)
9: Subprogram
1 (E
2
PROM)
A: Subprogram
2 (E
2
PROM)
B: Subprogram
3 (E
2
PROM)
This register stores any of the values from 0 to B, indicating
which program is currently running.
Qn(H)
QnPH
D9017 SD1017 SD524
Scan time
Minimum scan
time (10ms units)
If a scan time value is smaller than the value in SD1017, the
SD1017 value is updated in the END processing. Therefore
the minimum value of scan time is stored in SD1017.
Qn(H)
QnPH
QnU
*1
LCPU
D9018 SD1018 SD520
Scan time (10ms
units)
This register stores a scan time in every END processing.
D9019 SD1019 SD526
Maximum scan
time (10ms units)
If a scan time value is greater than the value in SD1019, the
SD1019 value is updated in END processing. Therefore the
maximum value of scan time is stored in SD1019.
D9020 SD1020 
Constant
scan
Constant scan time
(User sets in 10ms
units)
This register stores an interval value in units of 10ms to run
a program at regular intervals.
• 0: No constant scan function
• 1 to 200: Constant scan function available (executing at
an interval of setting value  10ms)
Qn(H)
QnPH
D9021 SD1021  Scan time
Scan time (1ms
units)
This register stores scan time in every END processing.
Qn(H)
QnPH
QnU
*1
LCPU
D9022 SD1022 SD412
1 second
counter
Count in units of
1s.
• The value is incremented by one every second after
RUN.
• The counter starts the routine: counts up from 0 to 32767,
then counts down to -32768 and then again counts up to
0.
Qn(H)
QnPH
QnU
*1
LCPU
D9025 SD1025  Clock data
Clock data (year,
month)
This register stores the year (last two digits) and month in
BCD as shown below.
Qn(H)
QnPH
QnU
*1
LCPU
D9026 SD1026  Clock data
Clock data (day,
hour)
This register stores the day and hour in BCD as shown
below.
Qn(H)
QnPH
QnU
*1
LCPU
ACPU
special
register
Special
register
after
conversion
Special
register
after
modification
Name Meaning Explanation
Corresponding
CPU
b15
b12 b11
b8 b7
b4
b3 b0
to to to to
Example:
1987, July
H8707
Year
Month
b15
b12b11
b8 b7
b4
b3 b0
to to to to
Example:
31st, 10 a.m.
H3110
Day
Hour