2 - 2
2. DETAILS OF MIGRATION FROM Q17nDCPU(-S1) TO Q17nDSCPU
(Continued)
Product name
Model
before migration
Model
after migration
SSCNETIII cable
(Note-5)
MR-J3BUS
M
MR-J3BUS M-A
MR-J3BUS
M-B
(Note-6)
← (same as the left)
(Note-1): If the number of axes used in the system with Q173DCPU(-S1) is 16 or less, Q172DSCPU can be also selected.
(Note-2): Use the cable for forced stop input (sold separately). The forced stop cannot be released without using it.
(Note-3): A specialized tool is required when fabricating a forced stop input cable by user. Refer to “Q173D(S)CPU/
Q172D(S)CPU User's Manual” for details.
(Note-4): Q17nDCPU-S1 only
(Note-5): “
” indicates the cable length.
(015: 0.15m, 03: 0.3m, 05: 0.5m, 1: 1m, 5: 5m, 10: 10m, 20: 20m, 30: 30m, 40: 40m, 50: 50m)
(Note-6): For a long distance cable of up to 100 m or an ultra-long bending life cable, contact Mitsubishi Electric System &
Service Co., Ltd.
OVERSEAS SERVICE SECTION (Email: osb.webmaster@melsc.jp)
To Next Page
Loading...
