Mitsubishi Electric Q172DCPU - Operating System Software; Engineering Environment (Required)

2 - 4
2. DETAILS OF MIGRATION FROM Q17nDCPU(-S1) TO Q17nDSCPU
[Comparison of servo system network]
Item
Communications medium Optical fiber cable
←
(same as SSCNETIII)
Communications speed 50 Mbps 150 Mbps
Communications
cycle
Send 0.44 ms/0.88 ms 0.22 ms/0.44 ms/0.88 ms
Receive 0.44 ms/0.88 ms 0.22 ms/0.44 ms/0.88 ms
Number of control axes
Up to 16 axes/line
←
(same as SSCNETIII)
Transmission distance [Standard code for inside panel]
Up to 3 m between stations
Maximum overall distance:
48 m (3 m × 16 axes)
[Standard cable for outside panel]
Up to 20 m between stations
Maximum overall distance:
320 m (20 m × 16 axes)
[Standard code for inside panel and standard cable for
outside panel]
Up to 20 m between stations
Maximum overall distance: 320 m (20 m × 16 axes)
[Long distance cable]
Up to 50 m between stations
Maximum overall distance:
800 m (50 m × 16 axes)
[Long distance cable]
Up to 100 m between stations
Maximum overall distance: 1600 m (100 m × 16 axes)
2.1.2 Operating system software
Use the operating system software for Q17nDSCPU.
Before migration
After migration
CPU model OS Type OS model CPU model OS Type OS model
Q173DCPU(-S1)
SV13
SW8DNC-SV13QB Q173DSCPU
SV13
SW8DNC-SV13QJ
Q172DCPU(-S1) SW8DNC-SV13QD Q172DSCPU SW8DNC-SV13QL
Q173DCPU(-S1)
SV22
SW8DNC-SV22QA Q173DSCPU
SV22
SW8DNC-SV22QJ
Q172DCPU(-S1) SW8DNC-SV22QC Q172DSCPU SW8DNC-SV22QL
(Note): The operating system software (SV22) is installed in Q17nDSCPU at the time of product purchase.
2.1.3 Engineering environment (required)
The engineering environment that supports Q17nDSCPU is as follows.
Product name Model Version
MELSOFT MT Works2 SW1DND-MTW2-E Ver.1.34L or later
MELSOFT GX Works2 SW1DNC-GXW2-E Ver.1.84N or later
MELSOFT MR Configurator2 SW1DNC-MRC2-E Ver.1.12N or later