2 - 10
2. DETAILS OF MIGRATION FROM Q17nDCPU(-S1) TO Q17nDSCPU
2.3 Project Diversion
2.3.1 List of divertible/not divertible data (SV13/SV22)
Q17nDCPU(-S1) data name Divertible/not divertible Remarks
System settings
Basic settings
Base setting
○
Multiple CPU setting
○
System basic setting ○
SSCNET setting
○
(Note-1)
System configuration
○
SSCNET configuration ○ (Note-2)
Optional data monitor ○
High-speed read data ○
Servo data settings
Servo data ○ (Note-3)
Servo parameter ○ (Note-4)
Parameter block ○
Limit output data ○
Motion SFC programs
Motion SFC parameter ○
Motion SFC program ○
Servo programs
K mode allocation ○ SV22 only
Servo program ○
Mechanical system program ○ SV22 only
Cam data ○ SV22 only
Device memory ○
Backup data ×
Communication setting ○
Label and structure ○
○
: Divertible,
×
: Not divertible
(Note-1): Select SSCNETIII or SSCNETIII/H at SSCNET setting.
(Note-2): The existing servo amplifier model is replaced according to the selected communication type
(SSCNET) in SSCNET setting. Refer to MELSOFT MT Developer2 Help for servo amplifier
replacement.
(Note-3): Review the fixed parameters according to the resolution per servo motor revolution.
(Number of pulses per revolution and movement amount per revolution)
(Note-4): Refer to “MELSOFT MT Developer2 Help” for conversion rules for servo parameters.
To Next Page
Loading...
