Mitsubishi Electric Q26UD(E)HCPU - Page 544

542
SD634
Project data
batch save
error cause
Project data
batch save
error cause
This register stores the cause of an error occurred when the
batch save function is executed.
•0
H
: No error
•100
H
: SD memory card not inserted
•101
H
: Use of SD memory card stopped
•200
H
: Save-target data size exceeded the capacity of
memory card
•201
H
: Number of save files out-of-range
•202
H
: Number of save folders out-of-range
•300
H
: Write protection set to SD memory card
•400
H
: SD memory card write error
•401
H
: SD memory card removed
•500
H
: Save-target data read error (program memory)
•503
H
: Save-target data read error (standard RAM)
•504
H
: Save-target data read error (standard ROM)
•505
H
: Save-target data read error (SD memory card)
•510
H
: Save-target data read error (system data)
•600
H
: The batch save function was executed during the
latch data backup to the standard ROM.
•601
H
: The batch save function was executed during online
change.
•602
H
: The batch save function was executed with an FTP
client connected to and communicated with the CPU
module.
•604
H
: The batch save function was executed while the CPU
module change function with SD memory card was being
executed.
•607
H
: The batch save function was executed while the iQ
Sensor Solution function (data backup/restoration) was
being executed.
•608
H
: The batch save function was executed while the file
transfer function (FTP client) was being executed.
•701
H
: The batch save function was executed to the
program where "Execution Program Protection Setting"
was enabled with a block password.
S (Error) New
LCPU
*5
SD635
Project data
batch save
status
Project data
batch save
status
This register stores the current status of the batch save
function.
•0
H
: Not executed
•1
H
: Being executed
•2
H
: Completed
•FF
H
: Error
S (Status
change)
New
LCPU
*5
Number Name Meaning Explanation
Set by
(When Set)
Corresponding
ACPU
D9
Corresponding
CPU