53
CHAPTER 2 SYSTEM CONFIGURATION
2
2.3 Precautions for System Configuration
2.3.2 Peripheral device configuration
(3) When the Process CPU is used
*1 Format ATA cards by a programming tool only. ( Page 240, Section 9.3)
*2 For the writing method to a memory card and USB cables, refer to the following.
Operating manual for the programming tool used
*3 For the GX Works2, GX Developer, GX Configurator, and PX Developer versions that can be used with the Process
CPU, refer to Page 634, Appendix 5.1.
Memory card
*1
Memory card
*1
PC card
adapter
RS-232 cable
USB cable
(Connector type B)
*2
Personal Computer
(GX Works2, GX Developer,
GX Configurator, PX Developer)
*3
Process CPU
To Next Page
Loading...
