N00577200023
When the operation mode is in the “ON”
position, press the “ACC ON/OFF” switch.
The ACC indicators will appear in the multi
information display.
1- ACC indicator:
Indicating that the ACC is turned on.
2- Control state indicator:
Indicating that ACC is activated.
3- Set speed indicator:
Indicating the set speed.
If the set speed is not set, “---” is
shown.
4- Front vehicle indicator:
Indicating when the ACC detects a
vehicle ahead.
When a front vehicle is detected while
the ACC is activated, the ‘Active’ front
vehicle indicator shown in the illustra-
tion below will illuminate.
When a front vehicle is detected while
the ACC is not activated or the ACC is
canceled, the ‘Stand by’ front vehicle
indicator will illuminate.
Display
State
Stand by Active
Vehicle in
front detected
5-Following distance indicator:
Indicating the following distance.
Two states: “Stand by” and “Active”
When a front vehicle is detected while
the ACC is activated, the ‘Active’ fol-
lowing distance indicator shown in the
illustration below will illuminate.
When a front vehicle is detected while
the ACC is not activated or the ACC is
canceled, the ‘Stand by’ following dis-
tance indicator will illuminate.
Following
distance set-
ting symbol
State
Stand by Active
Long
Middle
Short
How to use ACC
To turn on ACC
BK0223400US.book 102 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
