By depressing the brake pedal while the ACC
is activated, the ACC control is canceled and
your vehicle speed will decrease.
At the point where the vehicle speed reaches
your desired speed, push down and release
the “SET -” switch; the new speed is then set
in the system.
N00582800027
Simply depress the accelerator pedal to tem-
porarily accelerate the vehicle. Releasing the
pedal automatically slows down the vehicle
to the set speed and ACC restarts its control.
N00581700045
There are two ways to cancel the ACC con-
trol.
By pressing the “CANCEL” switch.
By depressing the brake pedal.
The set speed can be changed even while
your vehicle is following a vehicle in front
using the ACC. In this case, however,
although the set speed itself is decreased,
your vehicle will not decelerate.
When the switch is held, a buzzer will sound
every time the set speed changes
By using the brake pedal:
The set speed indication on the display turns
to “---” when the accelerator pedal is
depressed. This indication remains as long as
the pedal is in a depressed position.
In certain conditions, the braking control and
alarming functions of ACC may not work for
a short while after releasing the accelerator
pedal.
To cancel ACC control
BK0223400US.book 108 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
