When the ACC is canceled, the “SET” indi-
cator goes off and the following distance indi-
cator turns to the ‘standby’ display. The front
vehicle indicator also turns to the ‘standby’
display when a front vehicle is detected.
In any of the situations listed below, the ACC
control is automatically canceled, a buzzer
sounds and a message is shown in the multi-
information display.
When your vehicle stops.
When the ASC is turned off.
While ABS, ASC or TCL is activated.
When the selector lever is in a position
other than “D” (DRIVE) and “Ds”
(DOWNSHIFT & SPORTY DRIVING).
When the parking brake is engaged.
When the ACC system determines that its
performance has been degraded, a buzzer will
sound and a message will be displayed in the
multi information display.
This can occur when
In adverse weather conditions, such as
rain, snow or sand storms, etc.
Foreign objects, such as dirt, snow or ice,
adhere to the surface of the radar sensor.
A front vehicle or an oncoming vehicle is
splashing water, snow or dirt.
Driving on a nonbusy road with a few
vehicles and obstacles in front.
The brake pads are overheating.
If the display keeps showing the message,
there is a possibility that the ACC has a mal-
function. Contact your authorized Mitsubishi
Motors dealer.
When the ACC system detects an abnormal-
ity in the system, the ACC system will be
turned off, a buzzer will sound and a message
will be displayed in the multi information dis-
play. If the message remains after the opera-
tion mode has been turned to the “OFF”
position and then turned back to the “ON”
position, contact your authorized Mitsubishi
Motors dealer.
To Next Page
Loading...
Need help?
General
