N00557201154
The temperature display unit can be switched.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to “Changing the function settings”
on page 5-140.
2. Lightly press the multi information dis-
play switch to select “ ” (temperature
unit setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch in from °C to °F, or from °F to
°C.
The setting is changed to the selected tem-
perature unit.
N00557301184
The language of the multi information display
can be changed.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to change from the setting mode screen to
the menu screen.
Refer to “Changing the function settings”
on page 5-140.
2. Lightly press the multi information dis-
play switch to select “LANGUAGE” (lan-
guage setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to display “LANGUAGE” (language set-
ting).
4. Lightly press the multi information dis-
play switch to select the desired language.
5. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to change the setting to the selected lan-
guage.
Changing the temperature unit
The temperature value on air conditioner
panel is switched in conjunction with outside
temperature display unit of the multi infor-
mation display.
However, “°F” or “°C” are not shown to tem-
perature display of an air conditioner.
On vehicles equipped with Mitsubishi Multi-
Communication System, the temperature
value of the air conditioner screen of Mit-
subishi Multi-Communication System is
switched in conjunction with outside temper-
ature display unit of the multi information
display.
However, “°F” or “°C” are not shown to the
air conditioner screen.
If the battery is disconnected, the memory of
the unit setting is erased and is automatically
set to °F (°C).
Changing the display language
If the battery is disconnected, the memory of
the language setting is erased and is automat-
ically set to ENGLISH.
If “---” is selected in the language setting, a
warning message is not displayed when there
is a warning display or interrupt display.
BK0223400US.book 143 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
