1. Shows the time until the next periodic
inspection.
2. This informs you that a periodic inspec-
tion is due. Contact an authorized Mit-
subishi Motors dealer or a repair facility
of your choice to have the system
checked.
3. After your vehicle is inspected at an
authorized Mitsubishi Motors dealer, it
displays the time until the next periodic
inspection.
The “---” display can be reset while the igni-
tion switch is in the “OFF” position.
1. When you lightly press the multi informa-
tion display switch a few times, the infor-
mation display switches to the service
reminder display.
2. Press and hold the multi information dis-
play switch for about 2 seconds or more to
make the spanner mark start flashing. (If
there is no operation for about 10 seconds
with flashing, the display will revert to its
original indication.)
3. With this indicator flashing, if you lightly
press the multi information display
switch, the screen switches from “---” to
“cLEAr”. After that, the time until the
next periodic inspection is shown.
The customer is responsible for making sure
that regular inspections and maintenance and
periodic inspections and maintenance are
performed.
Inspections and maintenance must be per-
formed to prevent accidents and malfunc-
tions.
The “---” display cannot be reset while the
ignition switch is in the “ON” position.
When “---” is displayed, after a certain dis-
tance and a certain period of time, the dis-
play is reset and the time until the next
periodic inspection is displayed.
If you accidentally reset the display, consult
an authorized Mitsubishi Motors dealer for
assistance.
BK0223400US.book 151 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
