Combination headlights and dimmer switch
Features and controls 5-179
N00532601580
If the following operation is performed
with the combination headlights and dim-
mer switch in the “ ” or “ ” position,
the lights automatically turn off.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch is turned to the “OFF”
or “ACC” position or the key is removed
from the ignition switch and the driver’s
door is opened.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode is changed to OFF or
ACC and the driver’s door is opened.
If the following operation is performed
with the combination headlights and dim-
mer switch in the “ ” or “ ” position,
the lights automatically turn off after
about 3 minutes.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch is turned to the “OFF”
or “ACC” position or the key is removed
from the ignition switch and the driver’s
door is not opened.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode is changed to OFF or
ACC and the driver’s door is not opened.
The sensitivity of the automatic on/off con-
trol can be adjusted.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
On vehicles equipped with Mitsubishi Multi-
Communication System, screen operations
can be used to make the adjustment.
Refer to the separate owner’s manual for
details.
Do not place anything on the automatic light
sensor (A), and do not clean with a glass
cleaner.
Do not cover the sensor (A) for the automatic
on/off control by affixing a sticker or label to
the windshield.
If the lights do not turn on or off with the
switch in the “AUTO” position, manually
operate the switch. Have the system checked
by an authorized Mitsubishi Motors dealer or
a repair facility of your choice.
Light auto-cutout function
(headlights and other lights)
BK0223400US.book 179 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
