7. The voice guide will say “Pairing Com-
plete. Would you like to import the con-
tacts from your mobile device now?”
Answer “Yes,” and the voice guide will
say “Please wait while the contacts are
imported. This may take several minutes.”
Answer “No” to end the pairing process.
If your device requires a specific pairing
code, you need to set the pairing code. Follow
the procedures below.
1. Press the SPEECH button (except for
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
2. Say “Setup.”
3. Say “Pairing Options.”
4. Say “Set Code.”
5. The voice guide will say “Do you want
the pairing code to be random or fixed?”
Say “Fixed.”
6. The voice guide will say “Please say a 4-
digit pairing code.” Say a 4-digit number.
7. The voice guide will say “Pairing code set
to <pairing code>.”
When the confirmation function is on, the
system will confirm whether the number
said is acceptable. Answer “Yes.”
Answer “No,” the system will return to
Step 6.
8. The voice guide will say “Do you want to
pair a device now?” Answer “Yes,” the
system will proceed to Step 3 in the pair-
ing process. Refer to the “Pairing proce-
dure- Type 2.”
N00565101080
If multiple paired Bluetooth
®
devices are
available in the vehicle, the cellular phone or
music player most recently connected is auto-
matically connected to the Bluetooth
®
2.0
interface.
You can connect to the other paired cellular
phone or music player by following setting
change procedures.
N00582200034
1. Press the SPEECH button (except for
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
2. Say “Setup.”
3. Say “Select phone.”
4. After the voice guide says “Please say,”
the numbers of the cellular phones and
device tags of corresponding cellular
phones will be read out in order, starting
with the cellular phone that has been most
recently connected.
Say the number of the cellular phone that
you want to connect to.
When the confirmation function is on, the
system will ask you again whether the
phone that you want to connect to is cor-
rect. Answer “Yes” to continue and con-
nect to the cellular phone.
Answer “No,” and the voice guide will
say “Please say.” Say the number of the
phone that you want to connect to.
5. The selected phone will be connected to
the Bluetooth
®
2.0 interface. The voice
guide will say “<device tag> selected”
and then the system will return to the
main menu.
If your device requires a specific pairing
code
Selecting a device
To select a cellular phone
To Next Page
Loading...
Need help?
General
