Screen type 1 Screen type 2 Cause Solution (Reference)
––
l
The keyless operation key is
not detected.
l
Insert the keyless operation
key into the key slot in the
glove box.
Refer to “If the keyless opera-
tion key is not operating prop-
erly” on page 3-19.
––
l
You have forgotten to remove
the keyless operation key
from the key slot in the glove
box.
l
Remove the keyless operation
key from the key slot in the
glove box.
––
l
The steering wheel is locked.
l
Press the engine switch.
Refer to “Steering wheel
lock” on page 3-16.
––
l
The engine is stopped while
the selector lever is in a posi-
tion other than the “P”
(PARK) position.
l
On vehicles with CVT, move
the selector lever to the “P”
(PARK) position to put the
operation mode in OFF.
––
l
The driver’s door is opened
with the steering wheel un-
locked.
l
Refer to “Steering wheel
lock” on page 3-16.
Indication lamp, warning lamp, and information screen display list
5-30
OGAE19E1
Instruments and controls
5
To Next Page
Loading...
