Set-
tings
name
Settings Value Settings content
TP-S OFF Do not automati-
cally search for
traffic messages
(TP stations).
PI-S
PI-S ON Search for the
same station or
local station in
that registered in
the preset chan-
nel.
PI-S OFF Do not search
for the same sta-
tion or local sta-
tion for that reg-
istered in the
preset channel
PTY
ENGLISH Set the display
language for the
program content
search (PTY
search) to Eng-
lish.
Set-
tings
name
Settings Value Settings content
FRANÇAIS Set the display
language for the
program content
search (PTY
search) to
French.
DEUTSCH Set the display
language for the
program content
search (PTY
search) to Ger-
man.
SVENSK Set the display
language for the
program content
search (PTY
search) to Swed-
ish.
ESPAÑOL Set the display
language for the
program content
search (PTY
search) to Span-
ish.
Set-
tings
name
Settings Value Settings content
ITALIANO Set the display
language for the
program content
search (PTY
search) to Ital-
ian.
CT
CT ON Update the time
if time data is re-
ceived.
CT OFF Do not update
the time even if
time data is re-
ceived.
*: It is necessary to press the [TP] key and
turn traffic message standby mode “ON”.
Time Setting
Turning the RDS setting CT setting “CT
OFF” enables manual setting of the time.
1. Select “YES” at the “Adjust time”
screen, and press the /SEL key.
The hour can be adjusted. Press the
/SEL key again to adjust the minutes.
2. Turn the /key to adjust the time.
3. Press the
/SEL key.
This completes the adjustment.
System settings
7-41
OGAE19E1
For pleasant driving
7