Mitsubishi ASX 2019

Screen type 1 Screen type 2 Cause Solution (Reference)
l
There is a fault in the Active
Stability Control (ASC).
l
We recommend you to have it
checked.
Refer to “Active Stability
Control (ASC)” on page
6-39.
l
There is a fault in the hill start
assist.
l
Have the vehicle checked at a
MITSUBISHI MOTORS Au-
thorized Service Point.
Refer to “Hill start assist” on
page 6-33.
l
There is a fault in the elec-
tronically controlled 4WD
system.
l
We recommend you to have it
checked.
Refer to “Electronically con-
trolled 4WD system” on page
6-27.
l
There is a fault in the CVT.
l
We recommend you to have it
checked.
Refer to “Automatic transmis-
sion INVECS-III Sports
Mode 6CVT (Intelligent &
Innovative Vehicle Electronic
Control System III)” on page
6-20.
l
The electronically controlled
4WD system is hot.
l
Refer to “Electronically con-
trolled 4WD system” on page
6-27.
Indication lamp, warning lamp, and information screen display list
5-37
OGAE19E1
Instruments and controls
5