Mitsubishi ASX 2019

For information on operations for vehicles
equipped with the keyless operation system,
refer to “Keyless operation system: Engine
switch” on page 3-13.
[Except for vehicles equipped with keyless
operation system]
LOCK
The engine is stopped and the steering wheel
locked. The key can only be inserted and re-
moved in this position.
ACC
The engine is stopped, but the audio system
and other electric devices can be operated.
ON
The engine is running, and all the vehicle’s
electrical devices can be operated.
START
The starter motor operates. After the engine
has started, release the key and it will auto-
matically return to the “ON” position.
NOTE
l
Your vehicle is equipped with an electronic
immobilizer.
To start the engine, the ID code transmitted
by the transponder inside the key must
match the code registered in the immobilizer
computer.
Refer to “Electronic immobilizer (Anti-theft
starting system)” on page 3-03.
ACC power auto-cutout func-
tion
After about 30 minutes has elapsed with the
ignition switch in the “ACC” position, the
function automatically cuts out the power for
the audio system and other electric devices
that can be operated with that position.
When the ignition switch is turned from the
“ACC” position, the power is supplied again
to those devices.
NOTE
l
It is possible to modify functions as follows:
NOTE
•
The time until the power cuts out can be
changed to approximately 60 minutes.
•
The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult
a MITSUBISHI MOTORS Authorized
Service Point.
To remove the key
1. Set the selector lever to the “P” (PARK)
position (CVT).
2. Push the key in at the “ACC” position
and keep it depressed until it is turned to
the “LOCK” position and remove it.
Ignition switch
6-12
OGAE19E1
Starting and driving
6