EasyManua.ls Logo

Mitsubishi ASX 2019

Mitsubishi ASX 2019
490 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To stop the system, turn the blower speed se-
lection dial to the “OFF” position.
NOTE
l
While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial. To prevent the windscreen and win-
dows from fogging up, the ventilator mode
will be changed to and the blower
speed will be reduced.
l
If the blower speed selection dial, air condi-
tioning switch, mode selection dial, or air se-
lection switch is operated while the system
is operating in the AUTO mode, the activa-
ted function overrides the corresponding
function of automatic control. All other
functions remain under automatic control.
Manual mode (Automatic air
conditioning)
Blower speed and ventilator mode may be
controlled manually by setting the blower
speed selection dial and the mode selection
dial to the desired positions. To return to au-
tomatic operation, set the dials to the “AU-
TO” position.
Demisting of the windscreen
and door windows
CAUTION
l
For safety, make sure you have a clear view
through all the windows.
Use the mode selection dial (“ or ”)
to remove frost or mist from the windscreen
or door windows.
For ordinary demisting
Perform the following settings to prevent
misting of the windscreen and door windows,
and to heat the leg area.
Heater/Manual air conditioning
Automatic air conditioning
1. Set the air selection switch (A) to the
outside position.
2. Set the mode selection dial to the
position.
3. Select your desired blower speed by
turning the blower speed selection dial.
4. Select your desired temperature by turn-
ing the temperature control dial.
5. On vehicles with air conditioning, push
the air conditioning switch (B).
For quick demisting
Heater/Manual air conditioning
Automatic air conditioning
1. Set the mode selection dial to the
position.
2. Set the blower to the maximum speed.
3. Set the temperature to the highest posi-
tion.
Heater/Air conditioning
7-09
OGAE19E1
For pleasant driving
7

Table of Contents

Related product manuals