EasyManua.ls Logo

Mitsubishi ASX 2019

Mitsubishi ASX 2019
490 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
l
Do not attempt to remove the radiator cap
while the engine is hot.
3. Confirm that the cooling fans are turn-
ing. If the fans are not turning, stop the
engine immediately and have it checked.
A- Cooling fans
B- Caution label
*: Front of the vehicle
WARNING
l
Be careful not to get your hands or clothes
caught in the cooling fan.
4. When the bar graph in the engine cool-
ant temperature warning display in the
multi-information display drops, stop the
engine.
Type 1
Type 2
Type 1
Type 2
5. Check the coolant level in the reserve
tank (C).
LOW
FULL
WARNING
l
If there is none, make sure that the engine
has cooled down before removing the ra-
diator cap (D), because hot steam or boil-
ing water otherwise will gush from the
filler port and may scald you.
6. Fill the reserve tank with coolant as nee-
ded. (Refer to the “Maintenance” sec-
tion.)
CAUTION
l
Do not add coolant while the engine is hot.
Suddenly adding cold coolant could damage
the engine. Wait for the engine to cool down,
then add coolant a little at a time.
Engine overheating
8-05
OGAE19E1
For emergencies
8

Table of Contents

Related product manuals