CAUTION
l
Note that the support bar may disengage the
bonnet if the open bonnet is lifted by a
strong wind.
l
After inserting the support bar into the slot,
make sure the bar supports the bonnet se-
curely from falling down on to your head or
body.
To close
1. Unlatch the support bar and clip it in its
holder.
2. Slowly lower the bonnet to a position
about 20 cm above the closed position,
then let it drop.
3. Make sure the bonnet is securely locked
by softly lifting the centre of the bonnet.
CAUTION
l
Be careful that hands or fingers are not trap-
ped when closing the bonnet.
l
Before driving, make sure that the bonnet is
securely locked. An incompletely locked
bonnet can suddenly open while driving.
This can be extremely dangerous.
NOTE
l
If this does not close the bonnet, release it
from a slightly higher position.
l
Do not press down the bonnet hard with a
hand as it may damage the bonnet.
NOTE
l
For vehicles equipped with the security
alarm system, if you drive with the bonnet
left open, warning display is displayed on
the information screen in the multi-informa-
tion display.
Type 1
Type 2
Bonnet
10-04
OGAE19E1
Maintenance
10
To Next Page
Loading...
