1Error list
Error no. H0009 *
1-2
H0009 * One of the errors below is detected.
Please take measures corresponding to an error message.
Error message Version UP (ALL)
Cause Message at version up.
Measures Turn the power OFF and ON once.
Error message Version UP (MAIN)
Cause Version UP (MAIN)
Measures Turn the power OFF,ROTSW=0 and power ON once
Error message Version UP (SERVO)
Cause Version UP (SERVO)
Measures Turn the power OFF,ROTSW=0 and power ON once
Error message The servo s/w was written
Cause The servo s/w was written
Measures Turn the power OFF and power ON once
C0010 Error message Illegal Version (file)
Cause The version is inconsistent.
Measures The file has been automatically initialized. The program is being deleted.
C0011 Error message Illeagal Version (system data)
Cause The version is inconsistent.
Measures The file has been automatically initialized. Turn the power OFF and ON once.
C0012 Error message Initialize (error log)
Cause The error log has been initialized because of version mismatch or the error log file is abnormal.
Measures Reset the alarm, and continue the operation.
C0013 * Error message Illeagal file
Cause Data including programs may have been damaged.
Measures Contact your service provider as the initialization operation is required.
H0014 * Error message System error (illegal MECHA)
Cause A character string cannot exceed 14 characters.
Measures Re-input the correct name.
H0015 * Error message Illeagal Version (file)
Cause Illeagal Version (file)
Measures Contact the maker.
L0016 * Error message Turn the power OFF and ON once
Cause The time from turning the power OFF to turning the power ON again is too short.
Measures Give more time before turning the power ON again after turning the power OFF.
H0020 * Error message System Error (same name is Backup data.)
Cause The data of the system backup area is abnormal.
Measures Please consult your service provider.
H0021 * Error message System Error (Backup data is Count over.)
Cause The control region is overflowing.
Measures Please consult your service provider.
H0022 * Error message System Error (Backup data is no area.)
Cause The region is too small.
Measures Please consult your service provider.
L0030 Error message Hand error. LS release
Cause This is a user setting error.
Measures Reset the error after removing the cause.
Error No. Error cause and measures
To Next Page
Loading...
Need help?
General
